A picture of Hacoblue polishing pad

Hacoblue

The Hacoblue polishing pad is a very soft, flocked polishing pad made with absorbent viscose fibers on a polymer substrate. Use the Hacoblue for final polishing when you need a very good flatness level and excellent surface finish.

Material

  • Viscose fibers on a polymer substrate
Values

  • Thickness: 1.10 mm
  • Hardness as is: 73° Shore A

Available with PSA adhesives HS and EB or OviO magnetic backing.

Product information

Shelf life: 24 months from production date.

Packaging: Our polishing pads are packaged in sealed bags of 10 to ensure that they remain clean during transportation. The bags are packaged in boxes to ensure that the pads remain laying flat in order to prevent creasing of the backing or delamination of the liner before usage.

Backings: Our polishing pads are available with PSA adhesives HS and EB or OviO magnetic backing. For more information about our backings see next tab.

Applications

  • Steel
  • Stainless steel
  • Titanium
  • Aluminum
  • Precious metals
  • Cast iron
  • Copper/brass
  • Minerals
  • Petographic
  • Electronics/PCB
  • Termal spray coatings
  • Composites (CFK/GFK)
  • Aluminum nitride
  • Cobalt chrome
  • Zinc oxide
  • Acrylics
  • Polycarbonate
  • Epoxy

HS

Our HS adhesive has a special polymer-based adhesive at on the laminating side and an acrylic adhesive on mounting side with a polyester-liner.
The HS provides excellent adhesion to the polishing cloth and excellent dimensional stability. A very strong adhesion to the plate during application, but still easy to remove at the end of the polishing process. A thicker carrier ensures easier mounting of thin cloths.
NGL Polishing Technologies have developed HS as a unique adhesive designed to be used with most known slurries in the polishing process. It is resistant towards water, water-glycol mixtures, alcohol, alcohol-glycol mixtures, oil (petroleum distillates), oil in water emulsions, bleach, etc.

EB

Our EB adhesive comes with a rubber-based high tack and peel adhesive at the laminating side, removable acrylic adhesive on mounting side and a siliconized paper-liner. The benefits of the EB adhesive are perfect adhesion with the polishing cloth and very good adhesion to the plate during application.
EB is a strong adhesive designed for mounting on all polishing cloths requiring an excellent lamination. Furthermore, it is resistant to alcohol and water-based slurries.

OviO

The flexible foil, together with a magnetic plate, eases the removal and alignment of the pad, and reduces down-time significantly. It makes it possible to re-use your polishing cloths until it is worn out, and is without the sharp edges usually found on hard metal-backings.

Applications Intended for use as backing for all our polishing-cloths.

Need more information?

Request technical data sheet

Appears in